Smart lighting

The H617C row does not establish Wi-Fi, native Matter or Alexa support; do not transfer another strip's capabilities.

• Plan space for the full 10 m (32.8 ft) H617C strip before mounting. Govee's model matrix marks this strip as not cuttable. Do not apply generic strip-cutting or splicing instructions to this model.
• Use the matching supplied power adapter and controller; Govee specifies 24 V / 0.75 A for H617C. Its documented control path is Bluetooth with the Govee Home app, not direct Wi-Fi or Alexa. Confirm the exact H617C1D1 package and power hardware before buying.
• Govee's general mounting guidance calls for a clean, dry surface and a planned cable route. Check the unit's instructions for the actual mounting surface and test the lights after placement. This estimate does not approve outdoor use, concealed wiring or custom power supplies; hardware and firmware have not been physically verified.

First setup check

Check suitable indoor E26 fixtures rated for these 110–130 V bulbs. The included Bridge needs power and a router Ethernet port.

• Confirm kit 562918 / UPC 046677562915 contains two E26 A19 color bulbs and a Hue Bridge. Check the existing fixtures against the bulb's 110-130 V and IP20 specifications before buying. This assessment covers replacement bulbs in suitable existing fixtures, not rewiring or outdoor installation.
• Provide power for the Bridge and an available router Ethernet port. Connect the included Ethernet cable, install the Hue app and keep the phone on the same home network during setup. Follow the app to pair the Bridge and discover the powered bulbs.
• The bulbs use Zigbee with the Bridge; the phone's Wi-Fi connection does not make these bulbs Wi-Fi devices. This profile does not cover Bridge Pro, migration of an existing system or native-Matter bulbs. Confirm the actual hardware, firmware and any assistant setup separately; no physical pairing test has been performed.

Electrical wiring, neutral and compatible dimming loads must be checked; not a plug-in controller.

• This in-wall dimmer requires electrical wiring and a neutral wire; it is not a plug-in device.
• Check the bulb's dimming type and the manufacturer's load limits before installation.

Electrical wiring and a neutral are required; not a plug-in device.

• This in-wall switch requires electrical wiring and a neutral wire; it is not a plug-in device.
• Check the manufacturer's wiring and load requirements with a qualified installer if needed.

The WLPA19C guide has fixture restrictions; app dimming does not imply external-dimmer compatibility.

• The documented WLPA19C uses an E26 base and 120 V, 60 Hz supply. Turn power off before fitting or removing the bulb and follow the instructions for your fixture.
• Do not use an external dimmer, a fully enclosed or poorly ventilated fixture, emergency lighting, or a location exposed directly to water. App dimming does not establish compatibility with a wall or lamp dimmer.
• Smart setup uses a Wyze account, the Wyze app and 2.4 GHz Wi-Fi. Follow the app's Bluetooth and location permission prompts during pairing.